<?xml version="1.0" encoding="utf-16"?>
<xsd:element name="DRPPboom" maxOccurs="10">
<xsd:annotation>
<xsd:documentation>Boom specific performance data</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TimeTag" type="xsd:dateTime">
<xsd:annotation>
<xsd:documentation>Time tag for recording of data. Date and time when the particulat "carrier" object was finalized.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="BoomId" type="DRBoomID">
<xsd:annotation>
<xsd:documentation>Boom id for the boom that drilled the holes BoomID counting starts with Boom #1 as the lower left boom seen from the machine towards the face. Further boom ID's are counted upwards and from left to right.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="LengthDrilled" type="xsd:float">
<xsd:annotation>
<xsd:documentation>Drilled hole length for the boom. Accumulative parameter. Total length calculated from start of log time. This parameter accumulates the hole length of all holes reported by all "DrilledInRock" parameters of the DRPQual profile. For definition of the start and end point for counting hole length see DRPQual. UNIT: meter Start counting</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="BoomTimingData" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Timing data for the boom. Calculted from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="TimeHydPumpOn" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Hydraulic pump on-time. Total time calculated from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimePos" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Positioning time. Total time calculated from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimePerc" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Rock drill percussion time. Total time calculated from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimeRodH" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Rod handling time (sum of coupling and uncoupling). Total time calculated from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimeChBit" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Time needed for exchange of Drill Bit or Hammer. Time calculated from stop drilling to start collaring including rod handling. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimeIdle" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Idle time. Machine not intentionally switched off but not in another working state. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="TimeBolting" type="xsd:duration" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Time used for bolting. Total time calculated from start log time. See "IREDES Drill Rig profile description" document.</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="NumHFAuto" type="xsd:unsignedShort" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Number of holes in Full Auto mode (auto positioning + auto anchoring + auto collaring + auto drilling), completed OK without operator interferance.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="NumHFErr" type="xsd:unsignedShort" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Number of holes in Full Auto mode, completed but with an error during positioning, anchoring, collaring or drilling of the hole, i.e. operator interferance during the automatic operation.</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="NumHMan" type="xsd:unsignedShort" minOccurs="0">
<xsd:annotation>
<xsd:documentation>Number of holes drilled in manual mode.</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
|